How To Reset Jio Fiber Router in Just 4 Simple Steps in 2023

Are you looking for how to reset Jio Fiber router? Jio Fiber is a popular broadband service in India. It provides high speed internet service. Jio Fiber router is a crucial component of the Jio Fiber broadband network because it is responsible for transmitting and receiving data for connected devices to the internet. Sometimes users face slow internet connections or technical problems. In such a case , resetting the router solves the problem. In this article we will tell you how to reset jio Fiber in just 4 simple steps.

How To Reset Jio Fibre Router 

Here are the four simple steps that will help you to reset the jio fibre router.

Step 1 : Locate the reset button on the Router 

The first step is to locate the reset button on the Jio Fiber router. The reset button is usually located at the back of the router.

Step 2 : Press and hold the reset button

Press and hold the reset button using a paper clip or a pin for about 10-15 seconds. You will notice the router lights flashing , indicating that the router is resetting.

Step 3: Wait For the reset process 

Wait for a few minutes for the reset process to complete.The router will automatically after the reset process complete.

Step 4 : Configure the router Setting 

After the router restarts , you will need to reconfigure the router setting. You can log into the router using the default username and password You can also restore the router configuration that you saved earlier.

Reason To Reset Jio Fibre Router 

Here are some reasons that might cause me to reset the jio fibre router.

• Slow Internet Speed
• Frequent Disconnections
• Router is not responding
• Unable to access the internet 
• Connectivity issue with devices

Troubleshooting Tips For Jio Fibre Router

If you are still facing the same issues with your jio router after reset then , here are some troubleshooting tips to solve the problem.

• Check the power supply cable : Ensure that the router is connected to a power supply and all cables are properly connected.
• Update router firmware : Check if there’s an update available for the router firmware. Updating the firmware can often solve technical issues.
• Reset network setting : Sometimes , issues with connectivity can be due to network setting on the device. Resetting network settings on the devices can often resolve the problem.
• Contact Customer Support : If you are unable to solve the issues with jio fibre router , you can contact customer support for further assistance.

How to Reset Jio Fibre Router Admin Password 

To reset jio fibre router admin password. Follow these simple steps to change the admin password.

• Locate the reset button on the back of the router. It is usually a small hole labelled “Reset”.
• Use a paper clip or a similar object to press and hold the reset button for about 10-15 seconds. Make sure to hold it down until the router LED lights start flashing.
• Once the LED lights start flashing , release the reset button.This will reset the router to its factory setting, including the admin password.
• Wait for the router to reboot , which may take a few minutes.
• Once the router has rebooted , connect to the network using the computer or mobile device.
• Open a web browser and enter the router IP address in the address bar.The default IP address for jio fibre router is usually 192.168.29.1
• You should now be redirected to default admin and password , which are usually “admin” and “password”respectively. Enter these details and log in.
• Once you have logged in , you can change the admin password to a new one of your choice.

How to Reset Jio Fibre Router Remotely 

To reset the jio fibre router remotely , Follow these simple steps.

• Open a web browser on a computer or mobile device connected to the Jio fibre network.
• Type the router IP address in the address bar. The default IP address for jio fibre routers is usually 192.168.29.1
• Enter the username and password for the router admin panel. If you haven’t change it, the default username and password will be “admin” and “password”.
• Once logged in , look for an option to restart or reboot the router. The option is usually found under the “maintenance” or “Advance” settings.
• Click on the restart or reboot option and confirm that you want to restart the router.
• The router will now start and may take a few minutes to come back online.
• You should now be redirected to the default admin username and password , which is usually “admin” and “password” respectively. Enter these details and log in.
• Once you have logged in , you can change the admin password to a new one of your choice. 

Conclusion 

Resetting the jio fibre router can help resolve technical issues such as slow internet , speed , disconnection or other connectivity issues. The process of resetting the jio fibre router is a simple process , you can do it by just following these simple steps as per given above.

Frequently Asked Questions